Analysis of Four Common Problems in Turning and Milling Compound CNC Lathes by CNC Lathe Manufacturers

For turn-milling composite CNC lathes, the processing efficiency and application range are still highly commendable. However, their own shortcomings are also important reasons that restrict their sales. Common ones include insufficient processing accuracy, high loss of equipment components, and so on. Today, our CNC lathe manufacturer will organize and analyze the four common problems of turn-milling composite CNC lathes for everyone.

1、 Insufficient machining accuracy

During the use of the turning milling compound CNC lathe, due to external reasons or internal problems of the equipment itself, it often leads to insufficient machining accuracy and standard deviation. The solution to this problem is to first check whether each component is working properly, and if any parts are damaged, they must be replaced in a timely manner. At the same time, it is also necessary to consider whether the processing technology and the use of fixtures are reasonable, adjust various parameters, and ensure that the equipment operates normally and smoothly according to the specified speed and force.

2、 Bearing overheating

During use, excessive wear of bearings can lead to excessively high bearing temperatures, which can affect the normal operation of the equipment, so timely treatment is necessary. The solution is to first inspect the bearings and replace them in a timely manner if any damage is found. In addition, it is necessary to ensure the oiling time and quality of oil lubrication, ensure good lubrication of the bearings, and avoid excessive wear. In addition, it is necessary to check whether the fixture is tight to ensure that there is no wear between the bearing and fixture during the processing.

3、 Severe tool wear

Tool wear is a common problem, and if not replaced or repaired in a timely manner, it can lead to equipment operation errors. To solve this problem, it is necessary to first use high-quality cutting tools and carry out maintenance and upkeep according to process regulations. During use, it is important to replace the cutting tools in a timely manner and make appropriate adjustments based on the machining situation using different blades and cutting fluids.

4、 CNC software failure

During the startup process, we sometimes find that the control panel is not responding or there are incorrect operations, which indicates that there is a malfunction in the CNC software. In order to prevent this situation from happening, it is necessary to follow the equipment's operating manual for correct operation. In addition, it is necessary to update the software in a timely manner, backup data, and avoid data damage and loss caused by viruses and other reasons during use.

The above are the four common problems of turning and milling composite CNC lathes compiled and released by our CNC lathe manufacturer Haishu Machinery. We hope it will be helpful for everyone in using turning and milling composite CNC lathes in the future.